Python 323 Manual de usuario descargar pdf (Pagina 18)

Remote Control Conﬁguration

Remote Programming

The Responder LE and 1-way companion remote controls have opera-

tions that can be conﬁgured to a user’s personal preferences. The fol-

lowing instruction will direct you through the available programming

options for both remote controls.

To enter programming, press and hold the

button for 8 seconds,

the remote emits one long beep and the transmit LED turns on to indi-

cate the main menu is accessed.

To exit programming or go back to a previous menu, press and re-

lease the

button. 1 short and 1 long beep is emitted for each step

back and when programming is exited the transmit LED turns off.

Note: The 1way remote does not emit any conﬁrmation beeps.

Pairing a 1-way or 2-way remote control

Note: The remote control may or may not emit sounds during this

operation.

Prepare the vehicle

Open1. a door.

Turn2. the ignition On.

Press3. and release then press and hold the control center button.

The control center LED ﬂashes and siren chirps one time to con-

ﬁrm the system is prepared.

Release4. the button and proceed below.

Note: Begin pairing within 60 seconds or the system will exit (indi-

cated by a long siren chirp) and need to be prepared again.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 40 41

Sin comentarios

Python 323 Manual de usuario Pagina 18