Python 248-8XX Manual de usuario descargar pdf (Pagina 27)

Liquid Cooled Millermatic Compatible™ Python

Owner's Manual - page 16

CUP INSULATOR AND O-RING MAINTENANCE

CAUTION: Power-off the coolant pump before disassembling liquid-cooled barrels.

1. Unscrew Retaining Nut and slide back on barrel.

2. Using a rm pull and twist action, the Liquid-Cooled Gas Cup can be removed from the Cup

Insulator.

3. Inspect the Cup Insulator and o-rings (included with Insulator) for wear and proper lubrication.

It is considered good practice to replace all o-rings at the same time.

4. To remove the Cup Insulator, it must be UNSCREWED and pulled from the barrel. Use a rag

or towel (due to o-ring lubrication) and wrap it around the Cup Insulator.

UNSCREW and pull when completly unthreaded from barrel. Be sure the Insulator is fully

unscrewed from the threads. Pulling the Insulator over barrel threads will damage the

threads on the Insulator.

Inspect o-rings on barrel for wear and lubrication. It is considered good practice to replace all

o-rings at the same time.

5. To install the Cup Insulator, it must be pushed all the way onto the barrel then screwed onto

the threads. If necessary, place small amount of o-ring lubricant on the inside diameter of the

Cup Insulator, this will help it slide onto the barrel.

Push the Insulator onto the barrel until it bottoms out, screw onto barrel threads.

The Insulator MUST be all the way onto the barrel to assure proper coolant passage and from

blocking the gas outlet orices.

6. Push Liquid-Cooled Gas Cup onto Cup Insulator. Slide Retaining Nut forward and tighten.

Incorrect Installation

Correct Installation

Insulator Barrel

Gas Outlet Orices

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Marke: Koolance | Kategorie: Hardware cooling accessories | Größe: 0.03 MB |

Weitere Produkte und Handbücher für Hardware-Kühlungszubehör Koolance

Modelle	Dokumententyp
QD2-M06-P	Datenblatt Koolance QD2-M06-P hardware cooling accessory, 1 Seiten
QD2-F06-P	Datenblatt Koolance QD2-F06-P hardware cooling accessory, 1 Seiten
QD2-MG4	Datenblatt Koolance QD2-MG4 hardware cooling accessory, 1 Seiten
QD2-M06X10	Datenblatt Koolance QD2-M06X10 hardware cooling accessory, 1 Seiten
QD3-M10X16-BK	Datenblatt Koolance QD3-M10X16 hardware cooling accessory, 1 Seiten
QD3-FG4-BK	Datenblatt Koolance QD3-FG4 hardware cooling accessory, 1 Seiten
QD3-F10X13-L	Datenblatt Koolance QD3-F10X13-L hardware cooling accessory, 1 Seiten
QD3-F10X13-BK	Datenblatt Koolance QD3-F10X13-BK hardware cooling accessory, 1 Seiten
QD3-F13-P	Datenblatt Koolance QD3-F13-P hardware cooling accessory, 1 Seiten
QD3-F10X16	Datenblatt Koolance QD3-F10X16 hardware cooling accessory, 1 Seiten
QD3-M10X13	Datenblatt Koolance QD3-M10X13 hardware cooling accessory, 1 Seiten
QD3-M10	Datenblatt Koolance QD3-M10 hardware cooling accessory, 1 Seiten
INS-FM18D	Handbuch Koolance INS-FM18D hardware cooling accessory, 1 Seiten
INS-FM19	Spezifikationen Koolance INS-FM19 hardware cooling accessory, 1 Seiten